|
CottageGuy (Structural)
11 May 04 15:20
Does anyone have any information on the capacities of Q-Deck?? I am trying to analyze an existing Q-Deck roof for new loads, but I do not have the original drawings.
I know the dimensions of the deck, and can assume the minimum thickness (for starters), but I don't know the yield stress.
It's about 30years old.
Thanks,
CG
JedClampett (Structural)
11 May 04 17:44
Robertson made a QL deck that I have ICBO reports for. Is that what you're looking for?
CottageGuy (Structural)
12 May 04 15:59
Jed,
What are ICBO reports?
I'm looking for design tables, similar to what VicWest produces. Span versus loading.
My span is about 30', with a loading about 100psf (or more). I haven't looked specifically at the loads, because I was looking for tables first. 字串6
The deck is 10" deep.
Thanks,
JedClampett (Structural)
13 May 04 11:32
ICBO Reports are code accepted documents giving design related information on manufactured items. If you have a manufacturer, I could check our files. It sounds like a cellular deck made by Robertson or Fenestra, but all the data I have only is for decks less than 7 1/2 inches deep.
CottageGuy (Structural)
14 May 04 15:11
Jed,
I don't have a manufacturer. Essentially, the client has pointed at the deck and asked if it works for the new loads!! If you don't have data for decks as large as 10" then I will try a few manufacturers directly.
Thanks for your help.
CG
JedClampett (Structural)
15 May 04 12:59
Sorry, CottageGuy, I have nothing that deep. Is your depth including a concrete deck?
字串6
CottageGuy (Structural)
18 May 04 9:39
Depth is just deck.
Thanks anyway...
CG
（Click：）
|
Add TO Favorites
